Vert-I-Pak

Friedrich offers a complete line of Vert-I-Paks

• Electric Heat - COOLING

• Completely self-contained

• No refrigerant lines running from floor to floor

• Fast, easy replacement keeps spaces livable.Lower installed cost

• Independent metering (no need to prorate for multitenant applications)

• Individual temperature set point (one unit can heat and others can cool)

• Less risk, with a whole building system, spaces may become uninhabitable until the system is repaired or replaced

• Vert-I-Pak can be easily accessed for maintenance or replacement.PSC permanently lubricated motor for low maintenance and maximum efficiency

• Engineered drain pan won't rust, eliminating the risk of unsightly rust stains from condensation on the building exterior

• Painted, 18-gauge galvanized steel cabinet resists corrosion

• Standard safety power disconnect

• Electronic control panel on unit for easy diagnostics and servicing

• 100% run tested prior to shipment - Every unit is tested in every operating mode before it'ships for optimal performance and reliability.Can be installed from any interior side (front, right or left)

• Ductable to multiple rooms

• Compact and lightweight, weighs as little as 114 lbs.

• Installation does not require an HVAC technician

• Prewired, charged and piped

• All units are ready to install with only electrical hook up needed to be up and running

• 10? crimped and beaded duct-collar ready to attach flex duct

• Patented telescoping wall plenums adjust to fit varying exterior wall thicknesses

• Primary condensate removal system provided thru 3/4" pipe fittings for more placement options

• Secondary overflow from primary drain

• Central desk control ready

• 24-volt remote wireless or wired thermostat ready

• All units are shipped (on pallet) with return air filter.Individually controlled

• Heat and cool

• Duct air specifically where it's needed, not just on the outside wall

• 2-speed fan with constant fan option on Friedrich RT6 and WRT1 thermostats.Industry leading warranty features 1 year full warranty on parts and labor and 5 year limited warranty.

• Nationwide service network and U.S. based Friedrich expert technical team ensures you get fast, knowledgeable service.

Additional Performance Specs
Front Cover Height
Front Cover Width
Front Cover Depth
Cut-Out Height
Cut-Out Width
Dimensions With Package
Net Weight	144 lbs
Shipping Weight	155 lbs
Air Circulation	CFM
COP	3
Moisture Removal	n/a
Indoor CFM High	450
Indoor CFM Low	350 cubic feet per minute
Sensible Heat Ratio	0.7
Vent CFM	60
R-410A Charge	48 oz
Suggested Retail Price	Please contact the Friedrich Contract Sales Department at (800) 541-6645

Cooling Btu/hr
Cooling Btu/hr	17000/16802

Detailed Electrical Information
Voltage	230/208
Volt Range	253-197
Cooling Amps	8.2/8.6
Cooling Watts	1886/1846
Reverse Heating Amps	7.5/8.2
Reverse Heating Watts	1560/1540
Compressor LRA	42
Compressor RLA	7.8
Outdoor Fan Motor	HP
Plug Face (NEMA #)
Power Cord Length

EER
EER	9.1/9.3

Reverse Heating Btu/hr
Reverse Heating Btu/hr	16000/15002

Unit Dimensions
Height	32
Width	23
Depth	23

Volts Rated
Volts Rated	230/208V

• Brouchures (2017 Vert-I-Pak Brochure )

• Brouchures (2016 Vert-I-Pak Brochure (Rev. 4))

• Brouchures (2016 Vert-I-Pak Brochure - Spanish (Rev. 3))

• Installation Manuals (2016 VPAK IOM - 9 to 18)

• Installation Manuals (2016 VPAK IOM 24 )

• Installation Manuals (2016 VPASA1 Kit Installation Instructions )

• Product Profiles (2016 Vert-I-Pak Product Profile (Rev. 2))

• Product Profiles (2016 Vert-I-Pak Product Profile (Rev. 2))

• Submittals (2016 Single Package Vertical Air Conditioners Submittal Fill-In (Rev. 1))

• Warranty (2016 Vert-I-Pak A Warranty )

• Accessories (2017 EMRT1-Thermostat Manual pkg )

• Accessories (2017 EMWRT1-Thermostat Manual pkg )

• Accessories (2017 RT6 Remote Thermostat Installation Manual )

• Accessories (2017 Vert-I-Pak VPAL2 Architectrual Louver Installation Instructions )

• Accessories (2017 Vert-I-Pak VPAWP Wall Plenum Installation Manual )

• Accessories ( 2017 Vert-I-Pak VPDP1 24000 Btu Model Drain Pan Installation Manual )

• Accessories (2017 Vert-I-Pak VPRG4 Return Air Grille Access Panel Installation Manual )

• Accessories (2017 VPASA Kit Installation Instructions 5 13 13 )

• Accessories (2017 WRT1 IOM 1 18 13 )

• Accessories (2017 WRT1 IOM 1 18 13 )

 

Marc’s Appliances Role

Within 24 hours of your delivery date, you will be notified with a 3 hour delivery time frame. Delivery times are approximate only. Marc’s Appliances can not guarantee a specific time. Should you require a redelivery, if delivery was not complete due to the appliance not fitting, water hoses frozen, or a water shut off valve frozen an added charge may apply. Standard delivery refers to first and second floor deliveries with appropriate access. Removal of existing units on a one for one basis. Marc’s Appliances will install electric appliances to existing fittings. Installation refers to washers, dryers, and electric freestanding ranges. Installation of the Anti-tip device is available at an additional charge. Be aware it is a fire hazard to install dryer vents to plastic ducts and Marc’s Appliances personnel will not install. Marc’s Appliances will not remove any old appliance laden with grease, oil or pests of any type. Marcs Appliances will relocate your old appliances within the home for an additional charge.

 

Customer role

We require a 24 hours notice of any changes to your address, phone number, sales order or to reschedule delivery. Measure all doors, hallways, staircases and location that the appliance will be installed to assure that your appliances will fit. Our delivery team cannot alter or exchange doors, door trims, or moldings. To protect your property and our delivery personnel, we require safe access into your home. Please make sure that all paths and walkways are clear of snow, ice and debris. Problems or damage to your property caused by our delivery team must be reported to our delivery drivers at the time of delivery. Any delivery deemed unsafe to your property or our delivery team may not be performed and will require remediation prior to re-delivery. Securing a Rebate, if applicable for your purchase, is the customer's responsibility. Marc’s Appliances does not offer Manufacturers Rebates. Marc’s Appliances will strive to assist the customer by providing rebate forms, serial numbers and invoice copies if needed.

 

Issues with your appliance or delivery

Any cosmetic issues or damage to the appliances must be reported to the delivery team at the time of delivery. If you have any installation issues within the first 7 days please contact the store and we will have the delivery team or installation person come back out to make the installation correction. During your Manufacturer warranty period or extended warranty please contact the manufacturer directly to set up service during the manufacturer warranty period. All service requests MUST be set up thru the manufacturer or extended warranty company.