Compact commercially listed manual defrost all-freezer with lock and reversible door

• "Commercially approved ETL-S listed to ANSI-NSF Standard 7 for use in commercial establishments

• Compact dimensions Sized for easy use on top of counters

• Fully finished cabinet Allows the unit to be used freestanding

• Manual defrost Static cooling system for improved temperature stability

• Adjustable thermostat Dial thermostat located inside the unit

• Factory installed lock Keyed lock for a secure interior

• Reversible door User-reversible door swing allows for more flexibility in placing the unit

• Removable shelves Wire shelves can be removed to accommodate different sizes or for easy cleanup

• Flat door liner Interior design conforms to CDC guidelines to ensure stable conditions for sensitive materials

• One piece interior liner Easy clean-up with a seamless liner that won't hold a mess in hidden crevices

• 100% CFC free Environmentally friendly design without ozone-damaging chemicals"

Amps
Amps	0.8

Cabinet
Cabinet	White

Canadian Electrical Safety
Canadian Electrical Safety	ETL-C

Compressor Step Width
Compressor Step Width	13.38" (34 cm)

Defrost Type
Defrost Type	Manual

Depth with door at 90°
Depth with door at 90°	34.5" (88 cm)

Door Swing
Door Swing	RHD

Height of Cabinet
Height of Cabinet	24.5" (62 cm)

Interior Depth
Interior Depth	13.0" (33 cm)

Interior Height
Interior Height	18.63" (47 cm)

Level Legs
Level Legs	2

Parts & Labor Warranty
Parts & Labor Warranty	1 Year

Refrigerant Type
Refrigerant Type	R600a

Shelf Qty
Shelf Qty	2

Weight
Weight	43.0 lbs. (20 kg)

Width
Width	18.5" (47 cm)

• FS30L7.pdf

• FS30L_manual.pdf

• R600a_AO.pdf

 

Marc’s Appliances Role

Within 24 hours of your delivery date, you will be notified with a 3 hour delivery time frame. Delivery times are approximate only. Marc’s Appliances can not guarantee a specific time. Should you require a redelivery, if delivery was not complete due to the appliance not fitting, water hoses frozen, or a water shut off valve frozen an added charge may apply. Standard delivery refers to first and second floor deliveries with appropriate access. Removal of existing units on a one for one basis. Marc’s Appliances will install electric appliances to existing fittings. Installation refers to washers, dryers, and electric freestanding ranges. Installation of the Anti-tip device is available at an additional charge. Be aware it is a fire hazard to install dryer vents to plastic ducts and Marc’s Appliances personnel will not install. Marc’s Appliances will not remove any old appliance laden with grease, oil or pests of any type. Marcs Appliances will relocate your old appliances within the home for an additional charge.

 

Customer role

We require a 24 hours notice of any changes to your address, phone number, sales order or to reschedule delivery. Measure all doors, hallways, staircases and location that the appliance will be installed to assure that your appliances will fit. Our delivery team cannot alter or exchange doors, door trims, or moldings. To protect your property and our delivery personnel, we require safe access into your home. Please make sure that all paths and walkways are clear of snow, ice and debris. Problems or damage to your property caused by our delivery team must be reported to our delivery drivers at the time of delivery. Any delivery deemed unsafe to your property or our delivery team may not be performed and will require remediation prior to re-delivery. Securing a Rebate, if applicable for your purchase, is the customer's responsibility. Marc’s Appliances does not offer Manufacturers Rebates. Marc’s Appliances will strive to assist the customer by providing rebate forms, serial numbers and invoice copies if needed.

 

Issues with your appliance or delivery

Any cosmetic issues or damage to the appliances must be reported to the delivery team at the time of delivery. If you have any installation issues within the first 7 days please contact the store and we will have the delivery team or installation person come back out to make the installation correction. During your Manufacturer warranty period or extended warranty please contact the manufacturer directly to set up service during the manufacturer warranty period. All service requests MUST be set up thru the manufacturer or extended warranty company.