Single chamber compact warming cabinet with glass door, digital thermostat, and lock

• "Compact size Small footprint is ideal for countertop placement

• Digital thermostat Electronic controls are conveniently located for easy temperature adjustment

• Electronic readout Large LED temperature display ensures your staff can easily monitor the interior temperature

• 120 to 150ºF Temperature Range Designed and set for hospital blankets

• Double pane tempered glass door Heat-safe glass door offers a full view of stored contents

• Self-closing door Door is equipped with self-closing mechanism and magnetic gaskets to prevent heat loss

• Factory installed lock Keyed lock for a secure interior

• Hammered aluminum interior Ensures easy cleaning inside

• Flush back Space saving design with easier cleanability

• Foamed-in-place cabinet Quality design ensures efficiently insulated interior

• Magnetic door gaskets Quality door gaskets ensure a tight seal for energy savings and improved performance

• Fan-assisted heating Interior blower ensures cabinet is evenly heated from top to bottom

• Fully finished gray cabinet Allows the unit to be used freestanding"

Cabinet
Cabinet	Gray

Canadian Electrical Safety
Canadian Electrical Safety	ETL-C

Capacity
Capacity	2.0 cu.ft. (57 L)

Depth
Depth	19.88" (50 cm)

Door Swing
Door Swing	RHD

Height of Cabinet
Height of Cabinet	29.5" (75 cm)

Interior Width
Interior Width	18.75" (48 cm)

Shelf Type
Shelf Type	Wire

Shipping Weight
Shipping Weight	160.0 lbs. (73 kg)

Temperature Range
Temperature Range	120 to 150ºF

Thermostat Type
Thermostat Type	Digital

Voltage/Frequency
Voltage/Frequency	115 V AC/60 Hz

• PHC51G.pdf

• PureTherm_Warming_Cabinet_M...

 

Marc’s Appliances Role

Within 24 hours of your delivery date, you will be notified with a 3 hour delivery time frame. Delivery times are approximate only. Marc’s Appliances can not guarantee a specific time. Should you require a redelivery, if delivery was not complete due to the appliance not fitting, water hoses frozen, or a water shut off valve frozen an added charge may apply. Standard delivery refers to first and second floor deliveries with appropriate access. Removal of existing units on a one for one basis. Marc’s Appliances will install electric appliances to existing fittings. Installation refers to washers, dryers, and electric freestanding ranges. Installation of the Anti-tip device is available at an additional charge. Be aware it is a fire hazard to install dryer vents to plastic ducts and Marc’s Appliances personnel will not install. Marc’s Appliances will not remove any old appliance laden with grease, oil or pests of any type. Marcs Appliances will relocate your old appliances within the home for an additional charge.

 

Customer role

We require a 24 hours notice of any changes to your address, phone number, sales order or to reschedule delivery. Measure all doors, hallways, staircases and location that the appliance will be installed to assure that your appliances will fit. Our delivery team cannot alter or exchange doors, door trims, or moldings. To protect your property and our delivery personnel, we require safe access into your home. Please make sure that all paths and walkways are clear of snow, ice and debris. Problems or damage to your property caused by our delivery team must be reported to our delivery drivers at the time of delivery. Any delivery deemed unsafe to your property or our delivery team may not be performed and will require remediation prior to re-delivery. Securing a Rebate, if applicable for your purchase, is the customer's responsibility. Marc’s Appliances does not offer Manufacturers Rebates. Marc’s Appliances will strive to assist the customer by providing rebate forms, serial numbers and invoice copies if needed.

 

Issues with your appliance or delivery

Any cosmetic issues or damage to the appliances must be reported to the delivery team at the time of delivery. If you have any installation issues within the first 7 days please contact the store and we will have the delivery team or installation person come back out to make the installation correction. During your Manufacturer warranty period or extended warranty please contact the manufacturer directly to set up service during the manufacturer warranty period. All service requests MUST be set up thru the manufacturer or extended warranty company.