15 Built-In All-Freezer

Commercially approved

• ETL-S listed to ANSI-NSF Standard 7 for use in commercial establishments

Built-in capable

• Make the best use of space by installing your appliance under the counter

Fully finished cabinet

• Allows the unit to be used freestanding

Stainless steel door

• Fully wrapped in stainless steel for a professional look

Factory installed lock

• Keyed lock for a secure interior

Frost-free operation

• Eliminates the need to manually defrost the interior

Digital thermostat

• Electronic controls for precise temperature management.

LED lighting

• Gentle illumination with an on/off switch

Adjustable chrome shelves

• Rearrange interior space to accommodate all sizes or remove shelves for simple cleanup

Reversible door

• User-reversible door swing allows for more flexibility in placing the unit

Flush back

• Space saving design

Open door alarm

• Audible alarm will sound if the door is left ajar for over a minute

Sabbath mode setting

• Optional setting lets you disable the lighting and alarm for up to 96 hours

100% CFC Free

• Environmentally friendly design with no ozone-damaging chemicals

General
Nominal Height (in.)	34
Height of Cabinet (in.)	34
Height to Hinge Cap (in.)	0
Width with Door Open (in.)	0
Depth with Handle (in.)	0
Depth with door at 90° (in.)	0
Capacity	2.4
Bottles	0
Defrost Type	Frost-Free
Cabinet	Stainless Steel
US Electrical Safety	ETL
Canadian Electrical Safety	ETL-C
Sanitation	ETL-S
Energy Usage/Year	330
Other Energy Info	0.0
Amps	0.8
Gas Yearly Amount	0
Gas Therm Amount	0
Voltage/Frequency	115 V AC/60 Hz
Weight (lbs.)	87
Parts & Labor Warranty	1 Year
Compressor Warranty	5 Years

• Use and Care Manual

 

Marc’s Appliances Role

Within 24 hours of your delivery date, you will be notified with a 3 hour delivery time frame. Delivery times are approximate only. Marc’s Appliances can not guarantee a specific time. Should you require a redelivery, if delivery was not complete due to the appliance not fitting, water hoses frozen, or a water shut off valve frozen an added charge may apply. Standard delivery refers to first and second floor deliveries with appropriate access. Removal of existing units on a one for one basis. Marc’s Appliances will install electric appliances to existing fittings. Installation refers to washers, dryers, and electric freestanding ranges. Installation of the Anti-tip device is available at an additional charge. Be aware it is a fire hazard to install dryer vents to plastic ducts and Marc’s Appliances personnel will not install. Marc’s Appliances will not remove any old appliance laden with grease, oil or pests of any type. Marcs Appliances will relocate your old appliances within the home for an additional charge.

 

Customer role

We require a 24 hours notice of any changes to your address, phone number, sales order or to reschedule delivery. Measure all doors, hallways, staircases and location that the appliance will be installed to assure that your appliances will fit. Our delivery team cannot alter or exchange doors, door trims, or moldings. To protect your property and our delivery personnel, we require safe access into your home. Please make sure that all paths and walkways are clear of snow, ice and debris. Problems or damage to your property caused by our delivery team must be reported to our delivery drivers at the time of delivery. Any delivery deemed unsafe to your property or our delivery team may not be performed and will require remediation prior to re-delivery. Securing a Rebate, if applicable for your purchase, is the customer's responsibility. Marc’s Appliances does not offer Manufacturers Rebates. Marc’s Appliances will strive to assist the customer by providing rebate forms, serial numbers and invoice copies if needed.

 

Issues with your appliance or delivery

Any cosmetic issues or damage to the appliances must be reported to the delivery team at the time of delivery. If you have any installation issues within the first 7 days please contact the store and we will have the delivery team or installation person come back out to make the installation correction. During your Manufacturer warranty period or extended warranty please contact the manufacturer directly to set up service during the manufacturer warranty period. All service requests MUST be set up thru the manufacturer or extended warranty company.